[4 Quick DIY Fixes] Generator only Runs on Choke / Half-choke!

As a general rule, the reasons a generator will stall when the choke is turned off are due to stale fuel, a clogged or restricted main jet, a clogged or restricted pilot jet, a loose fitting carburetor, or damaged carburetor gaskets. When the choke is turned off, the carburetor allows more airflow into the combustion chamber. If the air-to-fuel ratio is not correct when this takes place, then stalling will occur. This can be a fuel problem or an airflow problem. https://homebatterybank.com/quickly-fix-a-generator-that-only-runs-on-choke-half-choke/

Latest Videos

00:56 What_Size_Generator_to_Run_a_Fridge
What_Size_Generator_to_Run_a_Fridge
00:58 Why Does a Battery Bubble When Charging
Why Does a Battery Bubble When Charging
00:50 Does_a_Generator_Need_to_be_Grounded
Does_a_Generator_Need_to_be_Grounded
01:19 Copy_of_Safe_to_Refill_Generator_with_Fu
Copy_of_Safe_to_Refill_Generator_with_Fu
01:41 7_Reasons_Your_Generator_is_Stalling
7_Reasons_Your_Generator_is_Stalling
10:10 [Normal?] Gas Can to Expanding and Shrinking
[Normal?] Gas Can to Expanding and Shrinking
11:34 [4 Quick DIY Fixes] Generator only Runs on Choke / Half-choke!
[4 Quick DIY Fixes] Generator only Runs on Choke / Half-choke!
15:36 How to Flush & Vacuum Water Heater Tank to Remove Sediment - [Easy DIY Fix!]
How to Flush & Vacuum Water Heater Tank to Remove Sediment - [Easy DIY Fix!]
01:50 Keep Water Heater from Spinning!  [Remove Anode Rod EASY TRICK]
Keep Water Heater from Spinning! [Remove Anode Rod EASY TRICK]
04:10 Ryobi P320 Brad Nailer Won't Shoot Nails - Easy DIY Fix [Condensed Step-by-Step]
Ryobi P320 Brad Nailer Won't Shoot Nails - Easy DIY Fix [Condensed Step-by-Step]

Latest Videos